In this course, you will learn the skills necessary to deploy a Cisco Network Convergence System (NCS) 2000 Series network.
You will also learn how to perform node turnup. The course covers three shelf types, the Cisco ONS 15454 M12 Multiservice Transport Platform (MSTP), NCS 2006, and NCS 2002. You will learn how to deploy linear and ring dense-wavelength-division-multiplexing (DWDM) topologies. The course covers multiplexer-demultiplexer cards, Erbium-doped-fiber amplifier cards, Raman amplifiers, transponder cards, and the newest Cisco Any Rate muxponder cards and crossponder cards.
These cards are used in terminal, amplifier, and reconfigurable optical add-drop multiplexer (ROADM) node configurations. You configure wavelength-selective switch (WSS) linear and single-module ROADM (SMR) rings. This Optical Technical Training Intermediate course covers 10-gigabit unprotected circuits and 10-gigabit protection using Y-cable, optical channel transport unit-2 (OTU-2), and protection switch module (PSM) cards. Learn more about this NCS 2000 training course below.
Prerequisites
The knowledge and skills that a learner should have before attending this course are as follows:
- Basic knowledge of optical transport and protocols
- Basic knowledge of data network principles
Course Objectives
Upon completing this course, the learner will be able to meet these overall objectives:
- Connect to a Cisco ONS 15454 MSTP chassis using Cisco Transport Controller (CTC)
- Identify Node configurations according to card population Provision DWDM circuits using the Cisco Transport Controller (CTC)
- Conduct performance monitoring, alarm verification, and fault isolation
- Provision M12 WSS in linear and M6 SMR nodes in ring topologies
- Configuration options for the any rate muxponder and crossponder
- Perform Raman amplifier initialization
- Isolate optical network issues
Course Outline
- Lesson 1: CTC Operations
- Lesson 2: MSTP Topologies
- Lesson 3: Shelf and Card Installation
- Lesson 4: Fiber jumper installation
- Lesson 5: Linear Configurations
- Lesson 6: Node Turn-Up
- Lesson 7: Optical Channel Network Connection Circuits
- Lesson 8: Transponder and Optical Channel Client Connection Circuits
- Lesson 9: Multishelf
- Lesson 10: MSTP M6 SMR-Based Rings
- Lesson 11: 10-Gigabit Muxponder and Transponder Cards
- Lesson 12: 10-Gigabit with Y-Cable Protection
- Lesson 13: Alternative 10-GB Protection (PSM and OTU-2)
- Lesson 14: Any Rate Muxponder and Crossponder
- Lesson 15: Raman Amplifier
- Lesson 16: 40- and 100-Gigabit Transponder and Muxponder
- Lesson 17: Troubleshooting
Lab Outline
- Lab 1: System Setup and Login
Lab 2: Node Turn-Up
Lab 3: Creating Direct Circuits (OCHNC)
Lab 4: Creating Transponder Optical Client Circuits (OCHCC)
Lab 5: Configuring an SMR Ring
Lab 6: Installing 10-Gbps Transponder Cards with Y-Cable Protection
Lab 7: Alternate 10-Gigabit Protection (OTU-2 and PSM)
Lab 8: Any Rate Muxponder and Crossponder Options
Lab 9: Raman Amplifier
Lab 10: MSTP Troubleshooting
The primary audience for this course is as follows:
- Technical professionals who are responsible for installation, deployment, and maintenance of the Cisco ONS 15454 MSTP network
- Network operations, planners, and designers
- Network operations engineers