Cisco
Technology
Security
Cisco High-End Lab BOOT CAMP 2 - L2 Technology, QoS, Multicast, Security, IOS Features (CCIEENBC2)
About the course

This course is a challenging course that Trenocate is proud of, created as a countermeasure for the QoS, Multicast, Security, and IOS Features of the CCIE Lab exam. 
In order to acquire the skills required for the CCIE Enterprise Infrastructure Lab exam, practical training that meets the advanced and complex network requirements of CCNP level or higher will be intensively conducted over a period of 5 days. In addition to cultivating the flexibility, speed of configuration, and information search ability essential for configuring QoS, Multicast, Security, and IOS Features, you will also recognize and overcome your personal weaknesses and current skill level. 
The practical textbook used in the course is written in English, just like the CCIE Lab exam. Therefore, you will also develop English reading comprehension to understand the points that need to be configured. In addition, it comes with a detailed commentary in Japanese written by Trenocate's instructors, so you can effectively review not only during the training period but also after taking the course.

Prerequisite

Those who meet all of the following criteria or have the same level 
□ Passed the ENCOR exam 
□ Passed the ENARSI exam 
□ Completed "Quick QoS" (CSC0443V) 
□ Completed "Quick MCAST" (CSC0442V) 
□ Completed "Cisco High-End Lab BOOT CAMP 1" (CSC0449G)


Learning Objectives

● Be able to configure Multicast, QoS, IP and IOS Features, and Security, which are required for the CCIE Enterprise Infrastructure Lab exam. 
● Acquire knowledge to handle troubleshooting of Multicast, QoS , IP and IOS Features, and Security. 

● Acquire flexibility, speed, and information search capabilities for Multicast, QoS, IP and IOS Features, and Security. 
● Read questions written in English and determine what is required. 
● Recognize and overcome the skills required for the Lab exam, as well as your own skills and weaknesses.

Course content

1. Layer 2 Technology (Switch)

    STP path control with PVST+, Rapid PVST+, MST, VTP optimization,

    EtherChannel protocol control/load balancing, various SPAN settings,

    MAC Address Table tuning, 802.1Q tunneling, PVLAN


2. Layer 2 Technology (PPP)

    PPP CHAP, HDLC/PPP, MPPE, PPPoE


3. IP and IOS Fearures

    FHRP, DHCP, DHCP Snooping and DAI, SLAAC and DHCPv6, IPv6FHS,

    NTP, SNMP, IPSLA, EEM, Syslog, TFTP, FTP, NetFlow, NAT, Other IOS Features


4. QoS

    Router Classification, L2 Marking, WFQ/LLQ/CBWFQ, Policing,

    Shaping, WRED, ECN


5. IP Security

    IPsec VPN, DMVPN, Reflexive ACL, Time Base ACL, VLAN ACL,

    Other ACL usage, PBR, TCP interceptuRPF, traffic export,

    EPC (Embedded Packet Capture), CoPP


6. Multicast

    Static RP, AutoRP, BSR, Filtering, RPF control, SSM, Bidir PIM, MSDP,

    IPv6 Multicast

Who Should Attend
  • Those who are aiming for the CCIE Enterprise Infrastructure certification and want to overcome their weaknesses in order to pass the exam
  • Those who have extensive experience with Cisco products and who are building large-scale, advanced networks using Cisco products